If you are seeing this message either you are a guru who has a custom browser setting, or your browser is out of date and cannot handle some of the more recent Web standards. In our opinion this site would look much better with the standard setup of a modern browser. However we intend it to be accessible to any browser or Internet device.


  |   home  |   products  |   FAQ  |   contact  |  

you are here: home > products > fino

fino - an Arduino shield for the PIF FPGA board



You can increase the number of units at the checkout stage.

Click on any image to zoom.

What is it?

Fino is a converter shield for 3.3 Volt Arduino boards. It converts between the Raspberry Pi pinout and the Arduino pinout.

We developed the Fino board so that users could plug our PIF FPGA board into a 3.3 Volt Arduino or into one of the many boards which use the Arduino pinout.

You can plug a PIF board into a Fino shield, then plug the Fino shield onto a 3.3 Volt Arduino or similar.

What you get

  • one Fino converter shield circuit board
  • one 26-way boxed header, matching the 26-way Raspberry Pi xpansion connector
  • one 36-way strip of pin headers

Fino is supplied as a kit of parts. The headers have to be soldered onto the circuit board, as described in the manual.

A note on ordering and shipping: Because of the cost of shipping it may be best to order a Fino board as part of a larger order.

More information

The manual is here and the schematic is here.


Please note that the Fino board is designed for users who are familiar with electronic design and debugging, and familiar with the usual safety precautions when working with electronic equipment.

General enquiries: info@bugblat.com

Sales: sales@bugblat.com

Technical support: support@bugblat.com

Frequently Asked Questions:

Copyright © 2007 to 2019 Bugblat Ltd. Last modified: 13 Mar 2019.